John S. O'Connor's American Rich-Cut Glass Company

O'Connor's Cut-Glass Patterns

Because no catalog of the cut-glass items that were produced by John S. O'Connor's factories has come to light, it is difficult to assemble a list of pattern-names, and even more difficult to illustrate them. Nevertheless, this file is a start in this direction.

Without official catalogs one must rely primarily on material from the following sources:

Invoices, Letterheads, etc.:

Although Connelly indicates that some O'Connor factory records had been "preserved", and were available in Goshen, NY, at the time she wrote about her grandfather, John S. O'Connor, in 1964, they have yet to be discovered. The only factory record currently available is an invoice dated 14 Nov 1898 which is available at the Rakow Research Library, Corning, NY. The following excerpts have been taken from this invoice, courtesy of the RRL:

invoicea.jpg
invoiceb.jpg

This invoice is especially valuable because of its list of "Special Designs". Note especially the Tuxedo pattern. This is the first mention we have of the factory's name for the patented pattern that was known as "Rattan" for more than half a century.

Because the list of "Special Designs" includes nine patterns, which are mostly unknown, one would like to know when the invoice was printed -- earlier than 1899, of course, but how much earlier? One can arrive at an estimate if one knows when the listed patterns were designed. Aside from the patented Florentine (1888) and Tuxedo (1892) patterns, however, our knowledge is severely limited. Nevertheless, anticipating the later section that is concerned with contemporary articles and trade-paper reports, and examining these sources, estimated dates for two additional patterns can be added, for a total of four dated patterns, as follows:

Currently no information has been found for the Gem and La Reine patterns. The Princeton pattern was cut at least as early as Aug 1894 when it appeared on a punch bowl that served as first prize at a local regatta (The Jewelers' Circular, 6 Feb 1895, pp. 59-60); it could have been cut a year or two earlier. The Crescent pattern (unnamed) appears in a 20 Mar 1895 ad that was placed by Geo. Borgfeldt & Company in The Jewelers' Circular. It is identified in O'Connor's own ad that appeared in the 19 May 1897 issue of the same trade paper (p.32). In light of the fact that the pattern is derived from Hawkes's Chrysanthemum, it was probably first cut soon after 1890. Few companies seem to have paid attention to Chrysanthemum's 14-year patent.

Congress appears in a newspaper excerpt that is reprinted, undated and without a reference, in Barbe and Reed (2003, p. 190). (It is accompanied by three additional O'Connor patterns: Senate, Prince of Wales, and Lace Diamond. The Lace Diamond pattern is discussed in a separate file). The 400 pattern refers to that privileged segment of 'Nineties society, while Blooming Grove is a settlement about a dozen miles from Hawley. (Coincidentally, there is also a Blooming Grove, NY, which is a similar distance from Goshen.) No illustrations of these last two patterns, together with the Gem and La Reine patterns, have yet been found. Blooming Grove is the latest pattern listed, having been "prepared for the coming season" according to the 13 Jan 1897 issue of Jeweler's Circular. It is likely, therefore, that the invoice was printed in late 1896 or very early 1897. It is worth noting that Astoria, a high grade pattern introduced in 1898, is not on the invoice's list.

Patented Patterns:

florentine2x.jpg rattandx2.jpg

In his discussion of O'Connor's company Revi (1965, pp. 321-2) remarks that "the only [pattern] we could find that had been patented is known as their 'Princess' pattern", ignoring the fact that O'Connor had patented the aforementioned Florentine (above, left) and Tuxedo (above, right) patterns years earlier (patent nos. 18,732 and 21,424, respectively). Both of these patterns were cut at the Hawley factory, according to the invoice discussed in the previous section, as well as at C. Dorflinger & Sons. (The "Princess" pattern of 1895, an O'Connor "family patent", is considered below, following brief discussions of the Florentine, Tuxedo, and Parisian patterns.)

Contrary to what Feller has written (1988, p. 27), O'Connor retained his rights to the Florentine pattern when he patented it in 1888; he did not assign the patent to C. Dorflinger & Sons, even though he was employed by the company at this time. But he did permit Dorflinger to cut the pattern. When O'Connor patented his Tuxedo pattern in 1892, he was no longer formally employed by Dorflinger. But, as with the Florentine pattern, he allowed his former employer to cut it. These two examples indicate the cordial relationship that existed between Christian Dorflinger and his long-time employee.

"Rattan" was the name Dorothy Daniel assigned to the Tuxedo pattern in 1950, because at that time its official name was unknown. Given this date, it is not surprising that Feller had the following experience in 1988: "There are no references to "Rattan" in any Dorflinger company records and for this reason it has been excluded from my exhaustive list of patterns in chapter 9" (Feller 1988, p. 38). Feller's list (pp. 114-7) actually does include the "Rattan" pattern -- but it is listed as Tuxedo (p. 27)! This "Rattan"/Tuxedo confusion also appears in Letitia Cusick Connelly's biographical sketch of her grandfather. Connelly failed to notice that the two patterns are identical. She therefore lists "Rattan" and Tuxedo as if they are two different patterns.

In view of the prominence of the Tuxedo pattern on the aforementioned invoice, O'Connor must have thought highly of it. It is, therefore, no exaggeration to suggest that Tuxedo is O'Connor's "signature" pattern. However, it is strange that the pattern is so rarely encountered. The writer has never seen an example of it -- not even a photograph! Although one might suppose that the Parisian pattern would be the company's "signature" pattern, O'Connor had assigned its patent to Dorflinger in 1886, and it would, therefore, not be appropriate for him to cut the pattern when he founded his own company. He probably cut it only upon request, to "help out" his former employer.

Even though O'Connor neither advertised nor cut the Parisian pattern on a regular basis, it is shown here to complete John S. O'Connor's set of patented patterns. As can be seen, Parisian (patent no. 16,767) is a clearly defined, elegant design that avoids the over-elaboration exhibited by many patterns of the period. It is not surprising that it was one of C. Dorflinger & Sons most popular patterns during the late 1880s and 1890s. Moderately expensive, a bowl like this one would have retailed for about $21 in the mid-1890s. (Please see the O'Connor 5 file for further discussion of this pattern.)

Berry bowl cut in the Parisian pattern by C. Dorflinger & Sons, c1895. D = 9" (22.9 cm), H = 4" (10.2 cm). This bowl was offered for sale on eBay in 2003, but it failed to sell. The bidding ended at $212.50, an amount that was below the seller's reserve (Image: Internet).

parisian4.jpg

dp24060a.jpg dp22581.jpg

The patented "Princess" pattern, above left, can be regarded as a kind of "family patent" for two reasons: Arthur E. O'Connor, who designed the pattern in 1894 and patented it early in 1895 (patent no. 24,060), assigned the patent rights to his father. And, were it not for John's brother, James J. O'Connor, the "Princess" pattern probably would never have felt the cutter's wheel in the first place. This second reason requires the following discussion:

The writer takes issue with Revi's conclusions concerning the "Princess" pattern, in addition to the pattern's name which is discussed at the end of this section. The pattern definitely does not, in the words of Revi, "[resemble] O'Connor's Parisian pattern in many respects" (Revi 1965, p. 322), because, as can be seen in the patent's drawing, the pattern is not based on the hobstar, as is the Parisian pattern, but on rows of large diamonds, subdivided. Moreover, these diamonds have straight sides. Therefore, the pattern also definitely does not "[employ] a great many curved miter cuts in the over-all design." (p. 322) The curvature of the miters in the patent's drawing is an illusion, because the illustration is a perspective drawing of the pattern. The miters are straight, not curved; the pattern is linear. This linearity can also be demonstrated by considering James J. O'Connor's Colonial pattern of 1893 (patent no. 22,581), whose patent drawing is reproduced above, on the right. The "Princess" pattern is almost embarrassingly similar to Colonial. (But at least this copying is kept within the family!) Comparing the two patents, one sees that the "Princess" pattern simply drops the two horizontal miters of the Colonial pattern and subdivides the large diamonds in one row with short vertical miter cuts, resulting in "split squares". It is "telling" that Revi fails to recognize that it is the Colonial pattern that is cut on the shallow dish he illustrates (p. 279, upper right).

Why, one wonders, did not John S. O'Connor submit this design to the Patent Office himself? Possibly because the design would have been seen as quite reactionary if it had come from someone so strongly associated with the curved-miter cut. Or, perhaps O'Connor might simply have wanted to encourage his son to design patterns for patents. If so, he was not usuccessful. "Princess" is the only patent associated with Arthur. A third possibility is proposed in the following discussion:

The name usually given to Arthur's patented pattern, "Princess", is highly problematical. It is not known whether A. C. Revi, who first used the name, assigned it to the pattern himself, or whether he obtained the name from John S. O'Connor's granddaughter, Letitia Cusick Connelly. Pearson and Pearson, who did not have access to Revi's book in 1965, gave the pattern the descriptive name "Split Square", and this name is sometimes used today in place of "Princess". When he wrote his ENCYCLOPEDIA, Pearson knew about the Princess name, but he retained his own designation, "Split Square".

There is a third candidate, however, and it could actually be the pattern's true name. By the late 1890s O'Connor had begun an association with the New York City wholesaler Higgins & Seiter, judging from patterns advertised in the latter's catalogs. Unfortunately, only catalogs for 1899 (no. 10) and 1900 (no. 11) are currently available. By the time of these catalogs, Higgins & Seiter was advertising a few of O'Connor patterns using O'Connor's original names, a departure from H. & S.'s usual practice of assigning its own pattern-names to the cut glass it sold. Could the company have always used O'Connor's names? This is supported by the fact that at least three O'Connor patterns retain the names O'Connor original gave them: Walter Scott, Caprice, and Napoleon (if Revi's identification of the latter pattern, on p. 320, is correct). The only obvious exception to this "rule", in regard to O'Connor's products, is Arthur's "Princess" pattern which H. & S. advertised as the H. & S. pattern (but sometimes with no name at all). It is possible that H. & S. requested that O'Connor, father or son, design a pattern for its own, exclusive use, and that the O'Connors obliged with patent no. 24,060 which they did not name, leaving this up to H. & S.. It is likely that the wholesaler wanted a "popular priced" pattern. "Princess", now called H. & S., fills the bill.

While Revi probably named Napoleon correctly, he does make some serious errors that have caused considerable confusion:

1. Revi illustrates two patterns which he names "Star and Big Four" and "Big Four". But "Big Four" is described in the 21 Aug 1895 issue of The Jeweler's Circular as the name given to "six round handled nappies in four different cuttings". (The cuttings are not named.) Thus, the name "Big Four" concerns objects and is not a pattern-name.

2. Revi's "Double Star and Hatch" pattern-name, which could have originated with Letitia Cusick Connelly, would have been an odd choice for any pattern. It is too cumbersome. Revi appears to be using the following recommendation made by Dorothy Daniel when one is faced with a pattern whose name is unknown:

Generally there will be two definite motifs used in a pattern. Pick out the two dominant recognizable ones and, if this combination does not fit into any classification already defined either as [a] standard pattern or variation, identify your design by a combination of the names of the two principal motifs. [emphasis added]

O'Connor, experienced in marketing, always used patterns names that consisted of only one or two words -- patterns that were easily remembered. Barbe and Reed (2003, p. 191) believe that the "Double Star and Hatch" pattern is the same as H. & S.'s Comet pattern and, although the latter shows single columns of beading while the illustration in Revi's book has double columns, this writer agrees. He goes further, however, and suggests that Revi's table lamp illustrates a pattern that O'Connor also called Comet.

3. Revi gives the pattern name "Star" to two entirely different patterns cut on two well-known objects -- the O'Connor red cut-to-clear punch bowl and a decanter in the form of a bowling pin. The pattern on the decanter is unknown, but that on the punch bowl is clearly seen as Chrysanthemum in the H. & S. catalogs. Because of our previous discussion, the writer believes that this is also the name O'Connor gave to the pattern on his punch bowl. The punch bowl is discussed in detail in the O'Connor 9 file.

Contemporary Ads and Reports:

A preliminary examination of LABAC, a compilation of advertisements and reports found in trade publications by Smith and Smith (editors), indicates the following cut-glass patterns offered by John S. O'Connor. All of them are found in the following issues of The Jeweler's Circular:

20 Mar 1895, p. 30: Unnamed patterns by O'Connor, offered by Geo. Borgfeldt & Co., NY, NY. One, on a bowl and on a loving cup, is the Crescent pattern. Two other patterns are shown but thus far are unidentifiable.

21 Aug 1895, p. 37: Walter Scott (popular priced), Defender (medium grade), Excelsior (medium grade), and Norma (high grade), which has already been listed, above. No illustrations. Walter Scott is illustrated in ads placed by Geo. Borgfeldt & Company in the issues of 21 and 28 Aug, and 11 and 25 Sep 1895. (Walter Scott is also illustrated in the H. & S. catalogs, nos. 9 (1898), 10 (1899), and 11 (1900). Some of these illustrations have also been reprinted in Evers (1975). The pattern also appears in Boggess and Boggess, book 4, as item no. 584, but it is misidentified there.)

19 May 1897, p. 32: Crescent, illustrated on two decanters: handled and not handled.

26 May 1897, p. 18: Caprice, illustrated on a bowl, shape no. 120.

11 Aug 1897, p. [?]: "Vesica" illustrated on a bowl. Pattern is discussed in the O'Connor 6 file.

11 Nov 1908, p. 128: An unnamed pattern shown on a tall pitcher in an ad placed by "A. E. O'Connor, Manufacturer of Rich Cut Glass, Goshen, NY".


This preliminary review of the cut-glass patterns produced by John S. O'Connor's cutting shops in Hawley and Goshen has unearthed 21 named patterns, but illustrations for only a few of them are available. In addition at least four illustrated patterns have been published in the past, but without identification.

Updated 17 Mar 2005